Usually under an hour once the unit is accessible.
Kenmore warming drawer repair
Kenmore was never a factory, it was a badge on appliances built by Whirlpool, LG, Frigidaire and others. The first three digits of the model number tell us who actually made it, and that determines the parts.
The most common failure is the element, followed by the thermostat and the drawer switch that tells the appliance the drawer is closed. Humidity-controlled drawers add a vent damper that can stick.
- Independent repairer
- 90-day warranty
- Flat-rate quotes
Warming drawer repair symptoms on a Kenmore
These are the warming drawer faults we see on every brand. The Kenmore-specific ones are listed underneath.
Drawer does not heat
The element or the thermal fuse, with the drawer switch as the third possibility.
Heats but will not hold temperature
The thermostat or the temperature sensor has drifted.
Drawer will not close flush
Worn slides or a bent rail, often after the drawer has been overloaded.
Controls unresponsive
The control board or the panel switch.
Humidity setting has no effect
The vent damper is stuck. This is the part that separates a proofing drawer from a plain warmer.
Overheating or cycling off
A thermal cutoff opening, usually because a fan has failed or the vent is blocked.
What tends to fail on Kenmore
- Elite refrigerator control boards
- Top loader lid switches and clutches
- Dryer belts and rollers
- Dishwasher pump assemblies
Parts we carry for warming drawer repairs
These are the parts we carry as stock, which is why most repairs finish without a second visit. Usually under an hour once the unit is accessible.
- Heating elements
- Thermostats and thermal fuses
- Drawer switches
- Slides and rails
- Control boards and knobs
- Vent dampers
Kenmore warming drawer repair near you
- Acton, MA
- Andover, MA
- Arlington, MA
- Bedford, MA
- Belmont, MA
- Beverly, MA
- Billerica, MA
- Boston, MA
- Braintree, MA
- Brockton, MA
- Brookline, MA
- Brookline, NH
- Burlington, MA
- Cambridge, MA
- Chelmsford, MA
- Chelsea, MA
- Clinton, MA
- Concord, MA
- Danvers, MA
- Dedham, MA
- Derry, NH
- Dracut, MA
- Everett, MA
- Framingham, MA
- Gloucester, MA
- Haverhill, MA
- Hingham, MA
- Hudson, MA
Recent reviews
Every review below is copied word for word from the company's public Thumbtack profile.
Bouston was very professional and knowledgeable. He diagnosed the problem and had the parts replaced quickly. I am very pleased with the results.
Thank you so much! Great customer service. Came and fixed our washer, looks good as new! Hire him
Tim was very professional and did his job correctly but was sent a defective part. Ramin came and replaced the defective part and my stove works again. After an initial problem that wasn't their fault, masterfix did an excellent job. I would not hesitate to use them again. Thanks Tim and Ramin!
Questions we get asked
- What goes wrong with Kenmore warming drawers?
- Elite refrigerator control boards is the fault we attend most on this combination. Kenmore was never a factory, it was a badge on appliances built by Whirlpool, LG, Frigidaire and others. The first three digits of the model number tell us who actually made it, and that determines the parts.
- Is a warming drawer worth repairing?
- Nearly always. The parts are inexpensive and replacing the unit means matching the cabinet cut-out and the trim of the oven above it.
- Can a warming drawer be used to proof bread?
- Only if it has a humidity or proof setting. A plain warming drawer runs too dry and too hot for dough.
- The drawer heats but only at the back.
- The element has failed at one end, or the fan on a convection-style drawer has stopped circulating.
- Do you carry Kenmore parts for this?
- We stock the common failures listed on this page. Anything model specific is ordered after the diagnosis, and we tell you the wait before you commit. Every part carries 90 days of warranty.
Kenmore warming drawer not working?
Tell us the appliance and your ZIP code. We will call back with a two-hour window, usually within the hour.